INNOVATIVE OUTDOOR DUAL TECHNOLOGY MOTION DETECCTOR

The OPAL Plus is an outdoor dual technology motion detector, which is perfectly suited for application both on the outside of the protected building as well as indoors, where difficult or specific environmental conditions prevail (in halls, under umbrella roofs, etc.). The OPAL Plus detector incorporates PIR and MW technologies, as well as antimasking function based on the microwave technology. The dual technology combined with the algorithm of detector auto-tuning to the environmental conditions ensures high immunity to false alarms and, consequently, stable operation in harsh weather conditions, such as rain, snow, sunshine and strong gusts of air. The device offers correct operation in a wide temperature range from -40°C to +55°C, the ambient temperature changes being automatically compensated. The OPAL Plus detector has a detection angle as wide as 100 degrees and a reach of more than 15 meters. Also, as the look down zone is protected, any intruder’s attempt to approach the device to damage it or pull it off will be detected. In addition, the detector software has been designed so as to avoid false alarms caused by the movement of small pets. The OPAL Plus detector is also provided with a dusk sensor for OC output control, which allows it to be used in alarm systems with home automation, without having to install additional dusk detectors. The signal from the low-current output can be passed directly to the relay located in the electrical switchboard or to the home automation controller. The detector can also interface with the KNX system via a control panel of the INTEGRA series. . Specifications Supply voltage: 12 V DC Detected target velocity: 0,3…3 m/s Operating temperature range: -40…+55 °C Recommended mounting height: 2,4 m Standby mode current consumption: 15 mA Max. current consumption: 20 mA Relay contacts rated load (resistive): 40 mA / 16 V DC Maximum humidity: 93±3% Dimensions :65 x 138 x 58 mm Environmental class according to EN50130-5 IIIa Alarm signaling time :2 s Complied with standards :EN50131-1, EN50130-4, EN50130-5 Microwave frequency :24 GHz Warm-up period :40 s IP code :IP54 Detector weight (without bracket) :176 g Permissible load of D/N output (OC-type output) :50 mA / 12 VDC