HDMI® CABLE TESTER

The VTTEST30 is designed to test and verify professional installations and cables incorporating High-Definition Multimedia Interface technology. The device tests the wire circuit state of Standard HDMI® and High Speed HDMI Cables with HDMI Connectors and HDMI Mini Connectors.Equipped with 3 test modes (automatic fast and slow scan or manual test for step by step), this tool can test the conductors in straight, short, open, crossover in all RGB conductors. Features The VTTEST30 cable tester allows the fast and accurate verification of cables with HDMI Connectors and HDMI Mini Connectors, mapping continuity and proper configuration and displays 19 pins and shield connection status on both main and remote unit For cables with HDMI Connector and HDMI Mini Connector (Connector to Connector, Connector to Mini Connector, Mini Connector to Mini Connector); especially suites for fragile, easily damaged patch cord and in-wall cables Loopback function: the loopback function allows testing cables with Connector to Connector, Connector to Mini Connector on the main unit 3 test modes:fast continuity scans for testing all conductors’ status in a cable slow continuity scans for testing all conductors’ status in a cable manual test for step by step scan detecting of individual conductors’ situation HDMI cable mapping: automatically detect wiring on HDMI Connector or HDMI Mini Connector condition in straight, short, open, crossover in pin #1 to #19 and shield conductor Troubleshooting: quickly troubleshoot and verify HDTV installation and DIY termination in the field The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Specifications Cables tested: Standard HDMI and High Speed HDMI Cable with HDMI Connector or Mini Connector Support test (main unit and remote unit): 19 pin-to-pin wire map and shielding detection Test interface of master unit: 1 x HDMI Connector, 1 x HDMI Mini Connector Test interface of remote unit: 1 x HDMI Connector, 1 x HDMI Mini Connector Cable length: up to 50 meter Test mode: automatic fast scan, automatic slow scan Displays: 19 LEDs and shield LED on both main and remote unit Beeper indication Low battery indication: under 6.0 V Power source: 1 x 9 Vdc (6LR61C) (not included) Dimension: Main unit: 103 × 66 × 27 mm Remote unit: 103 × 35 × 27 mm Weight: 130 g (without battery) Operating environment: 0 ºC to 40 ºC (32 ºF to 104 ºF) < 80 % RH Storage environment: -10 ºC to +50 ºC (14 ºF to 122 ºF ) < 70 % RH